Flame Retardant & Welder Wear

Ripstop FR coveralls are 88/12 cotton/nylon blend with reflective trim for enhanced visibility. They meet NFPA 2112 standards and are UL certified.

Flame resistant for life of garment. Features Nomex® thread & zipper, meets ASTM F1506 and NFPA 2112, Arc Rating: ATPV = 4.5 cal/cm2 and NFPA 70E / HRC=1.

Cotton INDURA FRC coveralls protect you from heat and flame. Sewn for specially treated 9oz woven cotton material, these coveralls meet or exceed NFPA 70E, 1971, 1975 and 1977 standards. ARC thermal performance tested to ASTM F1506. Coveralls feature 7 double stitched pockets, hammer loop, non-sparking brass zipper closure and snaps on the lapel and wrist. Lock-down safety stitching throughout. All stress points are bar tacked. Elastic waistband for comfortable fit.

MIG WEAR is constructed from durable 9.5 ounce cotton sateen, specially treated to resist flames—even after 50 machine washings. Garments meet ASTM F1506-94 specifications (After Flame = 0, After Glow = 0, Average Char = 2") as well as EN533, EN531, and EN470.

Get extra protection from sparks and cinders with this heavy leather workwear. Sewn with heat and abrasion resistant DuPont™ Kevlar® Fiber thread. Stress points are riveted for extra durability.

Weld without worry, wearing this American-made flame retardent protective wear! Sewn from durable, flame retardent Proban. Won't burn or smolder. Can be washed. Seems are safety stitched, and all stress points are riveted.

Flame Resistant Coveralls are lightweight & comfortable. The 6 oz flame resistant treated cotton is soft & maintains its flame resistance through 25 washes. Meets ASTM F1506, Arc Rating: ATPV = 7.2 cal/cm² & NFPA 70E /Hazard Risk Category (HRC) = 1.

For general purpose welding, light sparks, minimal spatter. Temp Rating: 1000°F. Use for sparks on vertical plane only. Heat Cleaned; Fiberglass.

Very lightweight, soft and flexible with incredible ease of use. Withstands high heat up to 1800°F. The softest and toughest welding protection ever!

24 oz. medium duty gold acrylic fiberglass welding blanket is spark, spatter and abrasion resistant and is FM approved. Melting temperature of 1000° F.

125 GSM ThermoMAXX® Insulation good for -30°C. Basic heat and flame resistance combined with durability and hi-visibility safety striping.

Heavy duty FR treated fabric and inner lining meets ASTM F2302-08 convective heat and flame resistance. Reflective material meets DOT configuration.

Flame resistant cotton BSX® welding jacket with welder's collar to protect against sparks. Extended length coverage and dual inside and scribe pockets.

Attractive black & blue flame design. Stand-up welder’s collar, slant-opening scribe pockets, extended front for increased protection. 9oz. FR cotton.

Flame-resistant 9oz, 19” cotton sleeves with added reinforcement layer are great for extra protection and the wide arm elastic provides a perfect fit.

Comfortable, flame-resistant treated 9 oz. cotton with Silver FR reflective tape for hi-visibility. Ideal for light welding applications. 2 pockets.

9 oz. flame resistant 19” long cotton welding sleeves with reinforcement layer. Stylish black with red flames. Wide arm elastic - one size fits most

ANSI Class 2 vest made from 100% ANSI flame resistant cotton blend. Meets ASTM F1506, Arc Rating: ATPV= 7.1cal /cm2, NFPA 70E/HRC = 1. Can be logo'd.

Cotton with a flame resistant finish. Visibility is enhanced by flame retardant reflective tape. Knee pad pockets. Meets many safety standards.

Eclipse gives you Quad-hazard™ protection: hi viz, arc flash, flash fire, waterproof and chemical resistance. Soft, lightweight and easy to wear.

Comfortable, breathable material wicks away moisture. Modacrylic/cotton fleece blend with Nomex® thread. Meets ASTM F1506, NFPA 70E and is arc rated.

Stay cooler while welding! Breathable FR mesh back maximizes ventilation for comfort and mobility. Ideal warm weather protection for light welding.

NFPA 2112 certified by UL® for use in the Oil and Gas industry. Rrc rated, meets NFPA 70E with an ATPV of 8.7 cal/cm² and ARC 2. Meets OSHA 1910.269.

Comfortable and ARC 2 rated meeting NFPA 70E with an ATPV of 10 cal/cm². Soft FR single layer cotton jersey knit fabric. Protects to the base of neck.

Durable cotton construction with reflective striping and zipper front closure. Features 7 pockets, hammer loop and bar-tacked stress points.

Supportive cushioning mat for comfort when kneeling, sitting, or leaning during long welding runs. Flame-resistant fiberglass cover resists sparks.

ARC2 Dual hazard protection. Flame resistance for life of garment. Lightweight and comfortable adjustable button cuffs. Meets NFPA® 2112, NFPA® 70E.

Inherent (not treated) flame resistant protection. ARC2. High cotton content gives comfortable fit. Meets ASTM F1959/F1959M-12, ATPV 16 Cal/CM2.

Moisture wicking, breathable fabric and raglan sleeves for comfortable fit. ARC2. Meets ASTM F1959/F1959M-12, ATPV 12 CAL/CM2. 100% Cotton, 7 oz.

Moisture wicking, breathable fabric. Button front opening with placket. ARC2. Meets ASTM F1959/F1959M-12, ATPV 12 CAL/CM2. 100% Cotton, 7 oz.

Flame resistant treated insulated jacket. Waterproof with sealed seams. Flame resistant reflective stripes. ANSI/ISEA 107 Type R, Class 3, ASTM D6413.

Flame resistant modacrylic mesh. ARC1. Inherent flame resistant qualities will not diminishHook & loop closure. To be worn over ARC rated clothing ONLY.