GLOVES / Specialty Gloves / Chemical Resistant
Chemical Resistant
Chemical Resistant gloves are designed to keep hands protected from oil and other harsh chemicals while allowing you to maintain a superior grip in those types of working conditions. Galeton offers an extensive selection of coated gloves that are chemical resistant in a variety of coatings such as PVC, Nitrile, and Neoprene. With additional options such as insulated, and cut resistant you'll be sure to find just the glove for your job in our selection of fully coated gloves.
Viper® Double Dipped PVC
Viper gloves are coated with a premium solution of PVC that remains pliable. These gloves are fully lined with soft cotton jersey and treated with Actifresh to reduce odors from perspiration. Several style cuffs are available.
Dark Green Viper® Double Dipped PVC
Viper® gloves are coated with a premium solution of PVC that remains pliable. These gloves are fully lined with soft cotton jersey and treated with Actifresh to reduce odors from perspiration. Several style cuffs are available.
Single Dipped PVC Gloves, Rough Finish
We've added a rough, knobby finish to our smooth finish PVC glove for improved grip. Chose from knit wrist or 12 inch open cuff styles.
Single Dipped PVC Gloves, Smooth Finish
Galeton's PVC coated gloves provide durable protection from grease, liquids and abrasion. Effective between 25 and 150 degrees (F)
Power Shield Triple Coated PVC Gloves
Super flexible PVC coating keeps liquids and chemicals out, plus they've got an incredibly durable seamless cotton liner that's treated to resist bacteria and fungi. Washable. 12" triple dipped.
Shoulder Length PVC Coated
These 27 inch long PVC gloves will keep you dry and clean in the messiest situations. Perfect for protection against dirty water and many chemicals, these gloves have a 22.5 inch long PVC body topped with a 4.5 inch vinyl cuff sealed to the glove.
Lined 22 Mil Nitrile Unsupported
Get broad-range chemical protection and a "second skin" fit from Nitrile gloves. Nitrile is 3 times stronger than latex.
Unlined 15 Mil Nitrile Unsupported
Get broad-range chemical protection and a "second skin" fit from Nitrile gloves. Nitrile is 3 times stronger than latex.
Roto® Gloves
We designed these jersey-lined, liquid-proof PVC gloves for workers cleaning drains and sewers. PVC chips on the fingers and palms let you hold spinning cables with less abrasion.
Comet® Insulated Double Dipped PVC
These popular winter gloves protect hands in three ways: from cold, cuts and moisture. Foam insulation with a cotton jersey lining add warmth and comfort. We have added a rough finish to make your grip more secure. Choose knit wrist, safety cuff or 12 inch length.
Polar Flex Insulated PVC Coated
Trust us, these gloves will make your hands happy! Our Polar-Flex gloves are constructed from 3 layers to deliver toasty comfort in cold, wet conditions. Inside, the soft acrylic lining traps air to cushion and warm your hands. A seamless knit inner shell and the triple-dipped PVC coating with a fine grain finish, remain flexible in temperatures as low as 4° F so your hands won't get tired like they can when wearing other stiff, bulky styles. Gloves are 12" long for full wrist coverage.
Unsupported 30 Mil Neoprene
For protection from acetones. Flocked lining absorbs perspiration. Embossed finish improves grip.
AlphaTec® Neoprene Gloves
In environments where mechanical risks are combined with chemical exposure, these robust gloves provide optimal defense against oils, acids and more.
Scorpio Neoprene Gloves
Scorpio® is neoprene coated with a rough finish for better grip. It is resistant to a wide range of chemicals including oils, acids, solvents and caustics. The flexible neoprene coating stretches to provide a snug fit with a two-piece lining that eliminates seams which can cause hand irritation.
Ansell® Thermaprene Chemical & Heat Resistant Neoprene Gloves, 26 Inch
Long glove with chemical resistance and thermal liner for protection up to 400ºF. Meets FDA food handling requirements. ANSI cut resistance level 2.
Neoprene Rough Coated Gloves
Extra-long to extend well over cuffs and protect wrists and forearms from splashes. Rough finish to improve grip on slippery surfaces.
Sol-Vex® 11 Mil Nitrile Gloves
Sol-Vex® gloves are made from a high performance nitrile compound providing strength and durability. They are an excellent choice when working with aromatic and petroleum solvents, as well as caustics and animal fats. These unsupported gloves won't swell, weaken, or degrade. Component materials comply with FDA regulations for food contact.
Sol-Vex® 15 Mil Nitrile Gloves
Sol-Vex® gloves are made from a high performance nitrile compound providing strength and durability. They are an excellent choice when working with aromatic and petroleum solvents, as well as caustics and animal fats. These unsupported gloves won't swell, weaken, or degrade. Component materials comply with FDA regulations for food contact.
Nitri Master® 11 Mil Gloves
Not only does the Nitri Master® tractor tread finish provide a strong grip, but it also channels harmful chemicals away from the glove surface. This flexible glove is durable and very comfortable with its low modulus hybrid formulation—the hand actually relaxes as it is worn
Silver Shield Chemical Protective Gloves
Keep Silver Shield Protective Gloves on hand for the most comprehensive all-purpose chemical resistance. They're made of a lightweight, extremely flexible laminate that resists more chemicals than any other material you can buy. Wear them alone for the quickest protection or use them as a liner under other gloves. Gloves are 3 mils thick. Ambidextrious. Available in 4 sizes.
AlphaTEC® Nitrile Gloves
AlphaTEC® has a nitrile layer filled with microscopic channels that repel oils and other lubricants giving almost the same grip as in fluid-free conditions. It's also designed as a highly secure barrier against hazardous chemicals and dangerous liquids. Improved comfort and flexibility is provided by the glove's thumb position being rotated outward. The finger shapes are revised to allow for sensitivity to contact, and the outside is a soft polymer providing unmatched tactility and dexterity.
Sol-Knit® Nitrile Gloves
This is a premium quality nitrile glove that is durable, chemical resistant and comfortable with its interlock knit cotton liner. It stands up to abrasive surfaces and sharp edges better than lightweight neoprene or PVC. Curved, pre-flexed fingers and wing thumb reduce hand fatigue for extra comfort.
Nitri-Knit™ 26" Supported Nitrile Gloves
Nitri-Knit 26" Supported Nitrile Gloves resists cuts, abrasion and punctures. Great for use in chemical handling, general maintenance work and more. Out-performs natural rubber, neoprene and PVC when exposed to solvents, caustics and animal fats.
MAPA®: Temp-Tec NL-56 Neoprene Chemical Protection Gloves
Multi-purpose chemical resistance and excellent thermal insulation. Pebble finish for great wet grip. Comfortable knit cotton interior. 14 inches long.
MAPA® Stansolv AK-22 Nitrile Chemical Protection Gloves
Unique separate liner and shell provides liquid proof protection. Extremely supple and comfortable with cotton-knit lining and thermal insulation.
MAPA® StanZoil NK-22 Neoprene Gloves
Extremely supple gloves ideal for working with chemicals. Textured for better grip on wet objects and comfortable cotton-knit lining. 14 inches long.
MAPA® StanZoil NL-34 Neoprene Gloves
Great gloves for petroleum industry, working with water, oil, and greases. Soft knit cotton liner. High and low temperature protection. 12 inches long.
ATG® MaxiChem® Double Nitrile Coated Gauntlet Gloves
Ultra lightweight gloves for working with chemicals. Tested and certified according to EN 374-3KL. Superior grip in oily and wet applications.
ATG® MaxiDry® Plus™ Gloves, Gauntlet Cuff
Ultra lightweight and ideal for combo of chemical protection and flexibility. Meets EN 374-2, low level chemical resistance.
Atlas® 772 Nitrile Coated 26" Glove
Nitrile dipped with a rough finish for full arm coverage against a wide range of chemicals. ANSI Resistance Levels: Abrasion 5, Cut 1, and Puncture 2.
ShowaBest® NSK 24™ Nitrile Coated Gloves, Rough Grip
Soft cotton liner dipped in nitrile helps protect from a wide range of chemicals. Meets CFR, parts 170 to 199. ANSI Abrasion 6, Cut 2, and Puncture 2.
Memphis Red Coat 12 Inch PVC Gloves With DuPont™ Kevlar® Fibers
Liner made with DuPont™ Kevlar® Fiber giving it ANSI level 2 cut resistance and the double dipped PVC palm gives liquid-proof chemical protection. Stays flexible when cold.
Ansell® Winter Monkey Grip® Gloves
Stay warm and dry! Tough PVC coated gloves with foam insulation protects hands from abrasions and stays soft when cold. ANSI cut level 2.
Atlas® KV660 PVC Coated Glove with DuPont™ Kevlar® Fibers
Heavy-duty PVC coating over seamless knit shell made with DuPont™ Kevlar® Fiber for comfortable high level protection. ANSI Resistance Levels: Abrasion 6, Cut 3, and Puncture 4.
Dexterity® Cut-Resistant Knit Glove with Full Foam Nitrile Coating, Safety Cuff
DuPont™ Kevlar® fibers blend for ANSI cut 4 resistance. Two Nitrile coats for oil & solvent resistance. Ideal for handling sharp, oily glass or metal
Wells Lamont Jomac® PERM-RUFF PVC Gloves
Full PVC coating protects from a wide range of hazardous chemicals while PVC chips on surface provide superior wet/oily grip. Soft interlock liner.
Bob Dale BDG® Hi Viz Fleece Lined Double Dip PVC/Nitrile Glove, Smooth Finish, Safety Cuff
Double dipped PVC/Nitrile blend coated to resist abrasion, oils and many chemicals. Fleece lining absorbs perspiration. Yellow color for high visibility.
100% Satisfaction Guarantee!
- No Restocking Fee
- All Taxes & Shipping Refunded
- Prepaid Return Shipping
- Learn More
My Current Order
Your current order is empty.
Quick Order
Email Sign Up!
