Drain Covers, Blockers and Filters

Drain cover bag wall holder.

Drain cover Bag. Weather resistant nylon. Fits rectangular, square or 18" round covers..

Drain cover bag for 12" round drain cover.

This drain blocker is long-lasting and easy to use. It will stand up to heavy traffic and won't shred, rip, tear or degrade from long term outdoor use. It has a flexible, tacky urethane bottom layer that molds to uneven surfaces and tightly seals drains. Cover should overlap drain opening at least 3".

Place GutterGuard in front of curb-style inlets to filter stormwater before it enters the drain. It has overflow ports to prevent pooling in front of the drain. It is reusable after cleaning.

Install this basin guard under grates less than 24" x 24". It has an inner frame for rigidity. The needle-punched polypropylene filters out debris, oil and sediment from stormwater.

Create a permanent barrier with a closed cell interior that will spring back after it is rolled over or walked on. The vinyl cover resists oils, coolants and most chemicals. Secures to floor with sealant. Cut to desired length with a knife. Kit contains: 2 - 25'L x 5"W x 2"H BUILD-A-BERM® rolls; 6 - Sili-Thand™; Sealant Tubes; 1 - 4"W x 10'L 22 oz. Vinyl Seam Mender; 4 - BUILD-A-BERM® Corners.

BUILD-A-BERM® 6"H straight sections and corners available.

BUILD-A-BERM® 4"H straight sections and corners available.

BUILD-A-BERM® 2"H straight sections and corners available.

BUILD-A-BERM® 1.5"H straight sections and corners available.

Create a heavy-duty permanent barrier with a closed cell interior that will spring back after it is driven over. The 35 oz. vinyl cover resists oils, coolants and most chemicals. Kit contains: 1 - 12'L x 5"W x 2"H BUILD-A-BERM® Barrier (heavy duty); 6 - 4'L x 1"W x 1/8" Mounting Strips; 33 - 1/4" x 1 5/8" Anchors.

Keep spills from spreading through doorways with the DOORBLOCKER dike. Fits any doorway up to 4' wide. 4'L x 2"W x 1.5"H.

Are spilled fluids a problem for your facility? The SPILLBLOCKER® Dike keeps spilled liquids from spreading and going down the drain. Clean-up becomes much easier! The SPILLBOCKER's unique two-layer construction has a robust top layer and a very tacky bottom layer to adhere to smooth surfaces so it can stop fluids from seeping underneath. Made of chemical-resistant, flexible non--absorbent polyurethane. Multiple SPILLBLOCKERS can be connected to make a longer dike using #10384. Washable and reusable. Hi Viz Yellow or Black.

The SPILLBLOCKER® Dike unique two-layer construction has a hard top layer and a soft tacky bottom layer to adhere to smooth surfaces. It is a flexible non-absorbent polyurethane that is chemical resistant and reusable. Dovetail connectors allow several Dikes to be connected. 4 1/2" high. 4" wide at base. 4.5"H x 4"W x 5'L. Lime green only.

The SPILLBLOCKER® Dike unique two-layer construction has a hard top layer and a soft tacky bottom layer to adhere to smooth surfaces. It is a flexible non-absorbent polyurethane that is chemical resistant and reusable. Dovetail connectors allow several dikes to be connected. 6 3/4" high. 4.5" wide at base. 6.75"H x 4.5"W x 5'L. Lime green only.

The SPILLBLOCKER® Dike unique two-layer construction has a hard top layer and a soft tacky bottom layer to adhere to smooth surfaces. It is a flexible non-absorbent polyurethane that is chemical resistant and reusable. Dovetail connectors allow several dikes to be connected.

The SPILLBLOCKER® Dike unique two-layer construction has a hard top layer and a very tacky bottom layer to adhere to rough surfaces. It is a flexible non-absorbent polyurethane that is chemical resistant. Intended for one-time use only. Come with 10'L x 2.25"H x 2"W Dike; 1 connector; 1 yellow disposal bag.

SPILLBLOCKER® Dike Carrying case. 4"D x 24.75"Dia.

Contain spills on worksurfaces with the tabletop dike. It flexes to fit any smooth work surface. 4'L x 1"W x .0.75"H.

This drain insert is a below grate design for heavy traffic areas. It has an 18" deep accumulation pocket that collects oil and sediment. Fits storm drains up to 30" x 30" and round drains up to 30" in diameter. Three excess flow ports help avoid flooding.

Use the PIG® Drain Insert Plus to remove oil and sediment from storm water. It has an 18" collection pocket that still allows water to flow through. It's below grate design keeps it safe from traffic.

Retainer rods for drain insert.

GrateGuard has an absorbent pillow to capture hydrocarbons and sediment from stormwater. It has a UV-resistant polypropylene geotextile cover. 48"L x 24"W x 4"H.

Oil only replacement pillows for 10933 GrateGuard. 15"L x 9"W.

GrateGuard has an absorbent pillow to capture sediment from stormwater. It has a UV-resistant polypropylene geotextile cover. 48"L x 24"W x 4"H.

The heavy-duty drain insert holds up to 500 lbs. of debris and sediment. It has a 36" accumulation pocket and overflow ports to prevent blockage. Installs by lowering in place.

Confine leaks until they can be cleaned up. The LEAKBLOCKER dike won't absorb the spill and can be shaped to fit around the leak. The polurethane material has a tacky bottom that creates a tight seal with a smooth surface. 10'L x 2.25"W x 1.375"H.

This self bailer kit stops outflow from container units if a large hydrocarbon leak is detected. Water will flow through freely. Flow rate 7.5 gal.hour. Ext. dia 4.5" x 36"L.

Filter stormwater before it enters the drain. This combination curb-style drain insert works with a catch basin and street level grate and curb opening. Install the insert inside the curb inlet and the underskirt goes under the grate. Fits curb inlets from 24" to 42". Use for oil and sediment. Absorbs 1.4 gallons. 47"L x 48"W.

This drain insert is a below grate design for heavy traffic areas. It has an 18" deep accumulation pocket that collects trash and debris. Fits storm drains up to 30" x 40" and round drains up to 30" in diameter. Three excess flow ports help avoid flooding. Accumulation pocket 10" dia. X 12"L x 18"D. Skirting 60"L x 60"W.

Filter hydrocarbons from rooftop water with the downspout filter. Made from polyethylene and PVC it has an overflow port to prevent overflowing during heavy rain. Filter is easily replaced. Fits downspouts up to 5.75"Dia. 21"H x 22"Dia.

Grate lifting hook. 26"L