Phone: 800-221-0570   |   Fax: 800-322-2003

GLOVES  /  Palm Coated Gloves  /  Nitrile Palm Coated

Nitrile Palm Coated

Nitrile Palm Coated

Keep your hands safe and your grip secure with Nitrile Palm Coated gloves. These gloves are designed to offer you a better grip while you work with - even with the most slippery materials. We offer a large selection of nitrile palm coated gloves with features such as insulated, cut resistant and oil resistant.

Nitrile Palm Coated String Knit

We took our Super glove and changed the palm coating to nitrile for better grip and resistance to oily surfaces. The cotton/poly shell stretches easily allowing the glove to conform to your for better fit.

Otterback® Nitrile Coated Knit Gloves

Nitrile is a synthetic rubber that holds up best to oil. We use it to coat the fingers and palms of these finely knit gloves. The result is a super-flexible glove that lets you handle small, slippery parts with ease. Protects hands from rough surfaces and sharp edges. Backs are breathable to help hands stay cool.

Otterback XC 3/4 Nitrile Double Coated Gloves

Ultra-Lightweight and flexible for ease of use. Double dipped for extra durability and protection. Black nylon stretch knit shell conforms to hand.

Otterback® Foamed Nitrile Coated Knit Gloves

The foamed nitrile coating provides exceptional grip on dry, wet and light oily surfaces which gives greater ease for handling small, slippery parts.

Otterback Fleece™ Nitrile Palm Coated Insulated Gloves

Soft acrylic, terry fleece lining for unmatched comfort and warmth. Fine knit 15 gauge polyester shell. Sandy finish nitrile coating for excellent grip.

Otterback® Foam Nitrile 3/4 Coated Knit Gloves

Very lightweight with foam nitrile grip coating over palm side and back of knuckles for added protection. Knit shell enables back of hand breathability

Galeton RESIST™ Cut Resistant Knit Gloves with Nitrile Coated Palms

The durable nitrile palm coating gives an excellent grip. Good for metal fabrication, auto and general work. ANSI cut resistance level 3.

Otterback Arctic® Insulated, Nitrile Fully Coated Gloves

Helps keep hands warm and dry in cold, wet conditions. Cushiony thick, soft acrylic terry lining and double nitrile layer over black palm and fingers.

Otterback™ XC Gloves

2 protective nitrile coats! Same as Otterback Arctic™ but without fleece lining. Lightweight and comfortable. Ideal for work with oily or wet parts.

P-Flex Foamed Nitrile Coated Palm Gloves

Features flexible foamed nitrile palm coating that provides grip for both dry and oily surfaces. Lightweight nylon shell is breathable and comfortable

PFlex Pro Impact Resistant, Sandy Nitrile Coated, Cushioned Palm Gloves

We’ve got you covered – front and back! Durable yet flexible, you get padded protection at an affordable price! PVC pads on back and EVA palm padding.

Otterback® 3/4 Nitrile Coated Knit Gloves

Ideal for handling small, oily and wet parts. The oil resistant nitrile coating extends to knuckles for added protection. Breathable nylon knit backs.

P-Flex Foamed Nitrile 3/4 Coated Gloves

Flexible foamed nitrile palm coating provides grip for dry and oily surfaces. Coating is over palm, fingers and back of knuckles for added protection.

Otterback XC 3/4 Nitrile Double Coated Knit Gloves

Ultra-Lightweight and flexible for ease of use. Double dipped for extra durability and protection. Black nylon stretch knit shell conforms to hand.

Otterback 3/4 Nitrile Coated Knit Gloves

Ideal for handling small, oily and wet parts. The oil resistant nitrile coating extends to knuckles for added protection. Breathable nylon knit backs.

Otterback® Foamed Nitrile Coated Knit Gloves

The foamed nitrile coating provides exceptional grip on dry, wet and light oily surfaces which gives greater ease for handling small, slippery parts.

Ansell HyFlex 11-624 Nitrile Coated Dyneema® Gloves

These incredibly lightweight, flexible and comfortable gloves provide a winning combination of comfort, coolness & ANSI Level 2 cut protection.

Dexterity® Foam Nitrile Coated Cut-Resistant Gloves

Great gloves for sharp, oily parts. Made with DuPont™ Kevlar® Fiber/silica-infused fiber blend gives level 4 cut protection. Foam nitrile coated palms for grip in oil.

ATG® MaxiFlex® Ultimate™ Micro-Foam Nitrile 3/4 Dipped Gloves

Ultra-lightweight with optimized grip through its micro-cup finish. Boasts 360 degrees of breathability. Nice fit and feel helps reduce hand fatigue.

ATG® MaxiDry® Nitrile Coated Gloves

Foam nitrile coating that’s good for working with light oily parts. Provides a superior grip and abrasion resistance. Comfortable seamless knit shell.

Zorb-IT® Extra Gloves with 3/4 Back

The Zorb-IT® Extra Gloves with 3/4 Back is a dipped sponge nitrile glove that is engineered to deliver a sure grip. The stretchable, seamless nylon shell breathes making it more comfortable in warm/hot conditions. The ergonomic design reduces hand fatigue and provides a better fit.

Showa 4550 Zorb-IT® Gloves

The Showa 4550 Zorb-IT® is a dipped sponge nitrile glove that is engineered to deliver a sure grip. The stretchable, seamless nylon shell breathes making it more comfortable in warm/hot conditions. The ergonomic design reduces hand fatigue and provides a better fit.

Showa 4570 Zorb-IT® HV Gloves

The Showa 4570 Zorb-IT® HV Gloves are a dipped sponge nitrile glove that are engineered to deliver a sure grip. The stretchable, seamless nylon shell breathes making it more comfortable in warm/hot conditions. The ergonomic design reduces hand fatigue and provides a better fit.

Ansell HyFlex 11-510 Nitrile Coated Gloves with DuPont™ Kevlar® Fiber Liner.

Helps protect against abrasion and gives ANSI Level 2 cut protection. Black foam nitrile coating gives a sure grip in light oil and dry applications.

HyFlex®CR+

HyFlex®CR+ is rated ANSI Level 4 cut protection in a lightweight, ergonomic design. Its nitrile foam coating provides good dry grip whether working in light oil or dry environments. In addition it gives outstanding flexibility and dexterity when working with sharp materials.

MAPA Temp-Dex 710 Gloves

This dexterous glove provides dry heat protection for short duration up to 250 degrees F, excellent abrasion resistance and grip in moderate oily environments.

Bellingham® Nitrile Tough® GT Gloves

Breathable micro-foam palm coating for grip in dry and oily conditions. Lightweight 15 gauge nylon/spandex knit shell gives excellent fit and dexterity.

Bellingham® Nitrile Tough® Max Gloves

Breathable, nitrile/PU micro-foam, palm coating enhances grip. Moisture-wicking knit liner, with COOLMAX® fiber, helps keep hands cool and dry.

Bellingham® Bamboo Gardener™ Nitrile Palm Gloves

Soft feel, cool and comfortable to wear. 13 gauge knit bamboo/nylon/lycra liner. Strong nitrile palm coat resists abrasion and provides grip.

Dexterity® Impact-Resistant Foam Nitrile-Dipped Work Gloves

Molded TPR for back of the hand protection. Foamed nitrile coating for an excellent grip. Ideal for construction, material handling, and assembly.

Ansell ActivArmr® 97-003 Heavy Laborer Gloves

Shell made with cut resistant DuPont™ Kevlar® Fiber/Stainless Steel Fiber, foam nitrile palm with reinforced gel pads. Reduces vibrations & impacts, and provides super grip.

Ansell® ActivArmr® 97-002 HVAC Glove

Advanced dexterity for sharp work! ANSI resistance levels: Cut 3, abrasion 3, puncture 2. Made with Stainless steel/DuPont™ Kevlar® Fibers with foam nitrile coated palm.

TenActiv™ 18-Gauge Cut Resistant Knit Gloves with Foam Nitrile Palms

The world’s first 18-gauge ASTM Cut-Level 4 work glove. Very dexterous and boasts high tactile sensitivity. Foam nitrile coating for wet or dry grip.

Dexterity® Impact- and Cut-Resistant Knit Gloves made with DuPont™ Kevlar® Fibers

TPR backing helps reduce back of hand injuries. Cut resistant knit shell made from DuPont™ Kevlar® fibers is rated ANSI level 4. Nitrile coated palm.

Boss® 1UH7840 Arctik Tek™ Nitrile Palm Dip Sandy Foam, Acrylic Lined

Acrylic terry lined shell for maximum warmth. Sandy foam nitrile coated palm provides dry and oily grip. Knit wrist helps keep out the cold weather.

Lift Safety CHEM 5, Nitrile Palm Coated, Impact Resist Gloves

360 degree EN cut level 5 resistance with back of hand impact protection. Double coated sandy nitrile palm for superior wet, dry or oily grip.

HexArmor® 2090 Thin Lizzie™ Cut- & Puncture-Resistant Impact Protection Gloves

HPPE/glass fiber blend helps protect hands from cuts while allowing maximum dexterity. IR-X® Exoskeleton™ protects against blows to the back of hand.

HexArmor® 9000 Series™ 9010 Nitrile Palm Coated Cut- & Puncture-Resistant Gloves

SuperFabric® level 5 cut resistance with top-level flexibility and comfort. Abrasion resistant nitrile palm offers grip in dry & light oil situations.

HexArmor® 9000 Series™ 9016 Foam Nitrile Palm Coated Cut- & Puncture-Resistant Gloves

SuperFabric® level 5 cut resistance with flexibility and comfort. Abrasion resistant foam nitrile palm for excellent grip in heavy oil & wet situations

HexArmor® SharpsMaster HV™ 7082 Cut- & Needlestick Puncture-Resistant Gloves

Highest needlestick and cut resistance available plus incredible dexterity and comfort. Nitrile 3/4 knuckle dip for oil resistant palm and fingers.

TenActiv™ Composite Knit Cut-Resistant Gloves with ZedCoat™ Palms

ANSI level A3 cut and level 5 abrasion resistance. Special ZedCoat™ nitrile coating for oil resistance and grip in wet conditions. 13 gauge knit shell.

TenActiv™ 18-Gauge Composite Filament Fiber Cut-Resistant Knit with ZedCoat™ Palms

Finely knit 18 gauge ANSI cut level A4 for excellent dexterity plus special ZedCoat™ nitrile coating for oil resistance and grip in wet conditions.

100% Satisfaction Guarantee!

  • No Restocking Fee
  • All Taxes & Shipping Refunded
  • Prepaid Return Shipping

My Current Order

Your current order is empty.

Quick Order

Add to Cart