Pedestrian Safety

Pre-cut anti-slip treads can be installed anywhere you have stairs. They're a peel-and-place design and will resist grease, oil, water and solvents. 24"L x 6"W. 50 per case.

Yellow with black print barricade tape. 1 roll. 1,000'L x 3"W.

Red barricade tape with "Danger Do Not Enter". 1 roll. 1,000'L x 3"W.

Use hazard tape to help comply with OSHA regulations. Yellow/black should be used to identify safety hazards and red/white for fire equipment. Rubber adhesive backing for easy application indoors. 6 mil. vinyl. 1 roll.

Create any length barrier with these interlocking panels. Made from light weight polypropylene with no maintenance needs. 78"L x 19.5"W x 39"H.

Easily seen safety cone can be used indoors or outdoors. A base weight ring and 20" long plastic barrier chain can be added.

Striped tape comes in OSHA regulated colors. Use to identify safety hazards and fire equipment. 1 roll. 30'L x 2"W.

Solid tape comes in ANSI standard colors. Use to identify safety hazards. 1 roll. 30'L x 2"W.

41"H poly warning posts with chain. Reflective, yellow and black color. Additional 100' chain available.

41"H poly warning posts with chain. Striped color. Additional 100' chain available.

41"H poly warning posts with chain. Solid color. Additional 100' chain available.

Make a temporary traffic barrier with safety cones and the Tensacone® Topper. It fits on top of standard safety cones with a 12' retractable chevron webbing barrier.

Close off hazardous areas with the fast setup and takedown safety posts. Tape reads "Caution-Do Not Enter" and is on a SlowRetract™; tape mechanism. Three way connectors make it easy to configure L-shapes, U-shapes, T-shapes. Yellow post with black base and head. 2" dia. post. 13.5" base dia. 40"H.

Create a temporary barrier quickly and easily with the portable barrier system. The kit contains four 36" PVC tubes with aluminum legs, tape head with 13' of nylon barrier tape and vinyl storage bag.

Close off access to restricted areas with the wall mounted tape barrier. Each unit has 13' of retractable tape with a dispenser and receiving unit.

Wall mount receiver for barrier tape. .75"W x 4.38"H.

Make a more stable barrier with a barrier post and 18 lb. base. It dispenses 13' of tape and has a slow retraction mechanism. 2.5" Dia. Post. 17" Dia base. 37.6"H.

Adhesive that bonds to aluminum, steel, fiberglass, wood and more. 10.3 oz. cartridge.

Hinged floor safety sign has warning message displayed on both sides. Choose multi-lingual "Caution" (English, Spanish, French and German) or "Caution Wet Floor" (English only).

Guard against slips and falls with a rolled-on protective coating. It is part enamel and abrasive grit that resists oils, acids, mineral spirit, etc. Apply it to new or old concrete, metal or wood. Covers 100 sq. ft. per gallon.

Use this non-slip coating for vehicle traffic. This epoxy has abrasive silica-like grit that resists oils, gasoline, grease and other chemicals. Covers 100 sq. ft. per gallon.

Comply with NHTSA regulations with DOT certified conspicuity tape for trailers. Easily applied with peel-off backing. 1 roll. 150'L x 2"W.

This tape is made of a 46-grit mineral abrasive compound that provides durability and longer wear. It has a solvent based acrylic adhesive system for adhesion over a wide variety of surfaces, yet will remove cleanly for replacement. Meets or exceeds OSHA 1910.24 and 1910.26.

These tapes are made from a durable 6 mil. thick vinyl film with a rubber adhesive system that will adhere to most any clean, dry surface. Use them to make the work place safer by calling attention to hazards on floors, walls, and equipment. In addition they can be used for pipe banding applications.

Offer a visual warning of slip and fall hazards with premium grit traction tape. The surface is an aggressive 60-grit mineral abrasive compound on a thick PVC liner. Tape will adhere to most any clean, dry surface with an acrylic adhesive system. Adhesive and tape are water, chemical and oil resistant for both indoor and outdoor use. Meets or exceeds OSHA 1910.24 and 1910.26.

Offer a visual warning of slip and fall hazards with premium grit traction tape. The surface is an aggressive 60-grit mineral abrasive compound on a thick PVC liner. Tape will adhere to most any clean, dry surface with an acrylic adhesive system. Adhesive and tape are water, chemical and oil resistant for both indoor and outdoor use. Meets or exceeds OSHA 1910.24 and 1910.26.

Offer a visual warning of slip and fall hazards with premium grit traction tape. The surface is an aggressive 60-grit mineral abrasive compound on a thick PVC liner. Tape will adhere to most any clean, dry surface with an acrylic adhesive system. Adhesive and tape are water, chemical and oil resistant for both indoor and outdoor use. Meets or exceeds OSHA 1910.24 and 1910.26.